EVERCURE-RP9215 is a cold process, which produces a passivating film on surface of Iron and Steel.
- EVERCURE-RP9215 protects Iron and Steel against rusting in between process.
- EVERCURE-RP9215 is easy to operate and is controlled by simple test requiring no special chemical knowledge. No fumes or odor are given off.
1. Concentration : 10 Kgs of EVERCURE-RP9215 for every 100 ltrs of working volume.
2. Chemical Strength : 8 – 10 points
3. Immersion time : 10 minutes
4 Spray time : 2-5 Minutes
5. Temperature : Ambient
6 PH : 8-10
BATH MAKE UP
1. Partially fill the tank with water and add 10 kgs of EVERCURE-RP9215 for every 100 ltrs of bath.
2. Fill the bath up to its operating level with water and stir the solution thoroughly.BATH CONTROL
EVERCURE-RP9215 concentration can be determined can be determined more accurately by situation method.
a) Take 1 ml of Evercure bath solution into a conical flask.
b) Add 5 ml of sulphuric acid.
c) Titrate against N/10 potassium permanganate standard solution.
END POINT: Colorless to Pink
No. Of. Ml of N/10 Potassium Permanganate required = points.
Add 200 gms of EVERCURE per 100 ltrs of bath for each point below
FOLLOWING POINTS TO BE KEPT TO DISCARD THE TANK SOLUTION
When the de-rusted and neutralized components dip in the Evercure tank solution, contamination will form. When chemicals contamination reaches above a level, discard the bath solution and make a fresh bath solution.
Clothing should be protected if there is any possibility of continuous or frequent splashing with the solution. Wash off any splashes on the skin at once with cold water. If the solution gets in the eyes, wash out with liberal quantities of water and obtain immediate medical attention.
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: chennai
- Production Capacity: 500 tons per day